中国保险监督管理委员会关于寿险公司计算机2000年问题的通知

作者:法律资料网 时间:2024-07-03 18:07:17   浏览:8460   来源:法律资料网
下载地址: 点击此处下载

中国保险监督管理委员会关于寿险公司计算机2000年问题的通知

中国保险监督管理委员会


中国保险监督管理委员会关于寿险公司计算机2000年问题的通知
中国保险监督管理委员会




中保人寿保险有限公司、中国太平洋保险公司、中国平安保险股份有限公司、新华人
寿保险股份有限公司、泰康人寿保险股份有限公司、新疆兵团保险公司、美国友邦保
险公司上海分公司、美国友邦保险公司广州分公司、中宏人寿保险股份有限公司、太
平洋安泰人寿保险有限公司、安联大众人寿保险有限公司:
为贯彻落实国务院关于解决计算机2000年(Y2K)问题的精神,现将有关要求通知如下:
一、各公司立即组成由公司领导和相关业务部门负责人参加的Y2K协调小组,了解本公司的计算机是否存在Y2K问题。若存在问题,应抓紧研究解决。请各公司于1999年1月8日之前,将协调小组组长及联系人姓名、电话报中国保险监督管理委员会(以下简称“中国保监会”
)。
二、各公司要充分认识Y2K问题的紧迫性、复杂性。跨越2000年度的保单,不能因计算机Y2K问题,导致保费、保险金额、给付、责任准备金评估等事项的计算、统计出现错误。
三、各公司在执行本通知的过程中如发现问题,请及时向中国保监会报告。



1999年1月4日
下载地址: 点击此处下载

关于印发《增值税专用发票》式样的通知(附英文)

国家税务总局


关于印发《增值税专用发票》式样的通知(附英文)
国家税务总局




各省、自治区、直辖市税务局,各计划单列市税务局,海洋石油税务管理局各分局:
为了确保增值税凭发票注明税款抵扣制度的贯彻实施,现将《增值税专用发票》(以下简称《专用发票》)的式样发给你们,并就有关问题通知如下:
一、《专用发票》暂定式样和联次(式样附后)。票头印明监制税务机关所在的省、自治区、直辖市,字轨号码的排列方法自定。联次为四联,即第一联为存根联,第二联为发票联,第三联为抵扣联,第四联为记帐联。
二、《专用发票》的第二联和第三联套印省级税务机关全国统一发票监制章,套印位置按国税发〔1991〕112号文件的有关规定执行。
三、《专用发票》的印色,第二联为棕色,第三联为绿色,其余联次的印色全国不作统一规定。
四、《专用发票》的规格分为两种,用汉字印制的为40开(190×105);用两种文字印制的为32开(190×130)。票面限额全国不作统一规定。
五、《专用发票》的第二联和第三联用国家税务总局指定厂家生产的防伪专用纸印制,不套印底纹。也可继续使用无(涂)碳、压感纸印制专用发票,暂不统一更换防伪专用纸。其余两联的用纸全国不作统一规定。
六、《专用发票》由各省、自治区、直辖市税务局按照集中统一的原则指定企业印制,并报国家税务总局备案。对不在省会城市的计划单列市税务局暂可自行指定企业印制专用发票,可以套印计划单列市税务局全国统一发票监制章,但票头仍只统一印明所在省、自治区。海洋石油税务
管理局所管企业需用的《专用发票》,暂由海洋石油税务管理局各分局向所在省、直辖市税务局领购。
请各地接此通知后,立即做好《专用发票》开印前的一切准备工作,确保明年1月1日前将《专用发票》发到用票人手中。如果国家税务总局分配的防伪专用纸数量不够或防伪专用纸11月底之前未运到,经请示国家税务总局批准,各地可用原发票用纸印制少量《专用发票》以备应急
。但要严格控制印量,把新旧纸交替使用时间控制在一个季度之内。


(State Administration of Taxation: 25 October 1993 Guo Shui Fa[1993] No. 112)

Whole Doc.

To tax bureaus of various provinces, autonomous regions and
municipalities, tax bureaus of cities with separate planning and to
sub-bureaus of off shore oil tax administrative bureau:
In order to ensure implementation of the system whereby VAT tax
deduction is clearly indicated in invoices, the model of the Special VAT
Invoices (hereinafter referred to as Special Invoices) is hereby issued to
you and you are notified of the following related questions:
I. The temporary model and form number (attached behind) of the
Special Invoice. The Province, autonomous region or municipality where
the tax authorities are located are clearly printed at the top of the
invoice, the method for arranging the word track and word number is to be
self-decided. The number of invoice forms consist of four forms, the first
form is the stub form, the second the invoice form, the third is the
deduction form and the fourth the account keeping form.
II. The second and third forms of the Special Invoice are
chromatographed with the unified national invoice manufacture supervision
Seal of provincial-level tax authorities, the related stipulations of the
Document Guo Shui Fa (1991) No. 112 should be implemented in regard to the
location of the chromatographed seal.
Thirdly, as to the color of the Special Invoice, the second form is
brown, the third form green, but no unified national stipulation is laid
down for the color of other invoice forms.
Fourthly, the Special Invoice consists of two specifications, those
printed in Chinese character are 40-mo (190 x 105); those printed in two
languages are 32-mo (190 x 130). No unified national stipulation is laid
down for the nominal limit.
Fifthly, The second and third forms of the Special Invoice shall be
printed with the special paper for anti-forged invoices produced by the
factory designated by the State Administration of Taxation, without
printing the burelage. Carbon-free paper and pressure paper can continue
to be used to print Special Invoice, special anti-fake paper is not
changed in a unified way for the time being. No unified national
stipulation is laid down for the use of paper for the other two forms of
invoice.
Sixthly, The Special Invoice shall be printed by enterprises
designated by tax bureaus of various provinces, autonomous regions and
municipalities in line with the principle of centralization and
unification, and reported to the State Administration of Taxation for the
record. Tax bureaus of cities with separate planning not located in
provincial capital cities may temporarily designate enterprises to print
Special Invoice, may chromatograph the unified national invoice
manufacture-supervision seal of the tax bureaus of cities with separate
planning, but the provinces and autonomous regions where they are located
shall still be printed at the top of the invoice in a unified way. The
Special Invoice used by enterprises under the jurisdiction of the Offshore
Oil Tax Administration shall be received and purchased from the tax
bureaus of the provinces or autonomous regions where the branches of the
Offshore Oil Tax Administration are located.

The various localities, after receiving this Notice, shall
immediately perform all preparatory work well prior to the printing of
Special Invoice, so as to ensure that the Special Invoices will be
distributed to the users before January 1, 1995. If the amount of special
anti-fake paper allocated by the State Administration of Taxation is not
enough or the special anti-fake paper will not be delivered before the end
of November, the matter should be reported to the State Administration of
Taxation and has been granted approval, the various localities may use the
paper originally for invoices and printed a limited amount of Special
Invoice in order to meet the urgent need. But the printing amount must be
kept under strict control and limit the time for the alternate use of old
and new paper within one quarter.



1993年10月25日

关于对入侵探测器(四种)执行强制性认证制度的通知

公安部


关于对入侵探测器(四种)执行强制性认证制度的通知

公科安〔2003〕3号



各省、自治区、直辖市公安厅、局科技处(技防办):

为了适应WTO/TBT(技术性贸易壁垒协定)协议的要求,顺应国务院转变政府职能、改革行政审批制度的方针,完善和规范安防产品的市场准入制度,我局积极推进了安防产品认证制度的开展。自2002年5月1日起,对入侵探测器这一类安全技术防范产品中的室内用微波多普勒探测器、主动红外入侵探测器、室内用被动红外探测器和微波与被动红外复合入侵探测器四种产品实施强制性产品认证制度。上述产品不再适用生产登记批准制度。

安防产品强制性认证的实施由国家认证监督管理委员会授权中国安全技术防范认证中心进行。认证实施的依据为《安全技术防范产品强制性认证实施规则入侵探测器》;认证模式采用型式试验+初始工厂审查+获证后监督。

自2003年5月1日起,列入实施强制性产品认证目录的技防产品须获得强制性产品认证证书,并加施强制性产品认证标志,方可出厂、进口、销售;并从同日起,经销商、进口商不得再购进、进口和销售未获得强制性产品认证证书及未加施新标志的入侵探测器(四种)。

现将已获得强制性认证的产品、型号及企业通告各地技防管理机构(见附件)。今后如要查询获得强制性认证的产品、型号及企业目录请登录公安专网,网址:http://10.1.23.5/jfoa,在“产品信息”栏中进行查询。



附件1:通过强制性认证的产品目录

附件2:安全技术防范入侵探测器产品强制性认证标志(略)

二○○三年二月八日


附件1

通过强制性认证的产品目录



产品名称
产品型号
生产企业

壁挂式被动红外入侵探测器(室内用被动红外探测器)
DS940T、X794i
博世安保有限公司

吸顶式被动红外入侵探测器(室内用被动红外探测器)
DS938Z、MX938i、S936、DS939
博世安保有限公司

壁挂式三技术入侵探测器(微波与被动红外复合入侵探测器)
DS820iT、DS835iT、MX835、DS825T、DS840T、DS860、MX950、DS720i
博世安保有限公司

壁挂式三技术入侵探测器(微波与被动红外复合入侵探测器)
DS9360、DS9370
博世安保有限公司

DT7系列微波和被动红外复合报警(微波与被动红外复合入侵探测器)
DT700、DT706、DT7225、DT7235T、DT7435、DT7450
时机防盗系统(中国)有限公司

DT9系列微波和被动红外复合报警探测器(微波与被动红外复合入侵探测器)
DT900、DT906
时机防盗系统(中国)有限公司

DT6360STC微波和被动红外复合报警探测器(微波与被动红外复合入侵探测器)
DT6360STC
时机防盗系统(中国)有限公司

IS系列室内用被动红外探测器(室内用被动红外探测器)
IS2260T、IS150T、IS215T
时机防盗系统(中国)有限公司